UCPH2 Pillow BLock Bearings 2 Bolt Bearing Housing Pedestal Base

Bearing housing: pedestal base pillow block,two bolts,LDK brand (logo could be customized)
Material:HT200 cast grey iron(ductile iron available upon request)
Zerk fittings: Zinc plated A3 steel,at 90° position
Paint: dark green (other colors are available for choices)
hollow base
High/low temperature grease or solid lube customization is accepted
Upon request,pressed steel cover available at both side。 (S=open cover/SM=close cover)

Diagram Specification Parameter

Inquiry Now

 Mounted Bearings

 Rod End Bearings & Spherical Plain Bearings

Products

Diagram of Pedestal Base Pillow BLock Bearing Units UCPH2

Products

Specifications of Pedestal Base Pillow BLock Bearing Units UCPH2

Unit No.	Shaft Dia		Dimensions(mm)										Bolt Size (mm)	Weight (kg)
	d		H	L	J	A	N	N1	H1	Ho	B	s
	(in)	(mm)	H	L	J	A	N	N1	H1	Ho	B	s
UCPH201		12	70	127	95	40	13	19	15	101	31	12.7	M10	0.96
UCPH201-8	1/2		70	127	95	40	13	19	15	101	31	12.7	M10	0.96
UCPH202		15	70	127	95	40	13	19	15	101	31	12.7	M10	0.96
UCPH202-9	9/16		70	127	95	40	13	19	15	101	31	12.7	M10	0.96
UCPH202-10	5/8		70	127	95	40	13	19	15	101	31	12.7	M10	0.96
UCPH203		17	70	127	95	40	13	19	15	101	31	12.7	M10	0.96
UCPH203-11	11/16		70	127	95	40	13	19	15	101	31	12.7	M10	0.96
UCPH204		20	70	127	95	40	13	19	15	101	31	12.7	M10	0.96
UCPH204-12	3/4		70	127	95	40	13	19	15	101	31	12.7	M10	0.96
UCPH205		25	80	140	105	50	13	19	16	114	34.1	14.3	M10	1.20
UCPH205-14	7/8		80	140	105	50	13	19	16	114	34.1	14.3	M10	1.20
UCPH205-15	15/16		80	140	105	50	13	19	16	114	34.1	14.3	M10	1.20
UCPH205-16	1		80	140	105	50	13	19	16	114	34.1	14.3	M10	1.20
UCPH206		30	90	165	121	50	17	21	18	130	38.1	15.9	M14	1.60
UCPH206-17	1-1/16		90	165	121	50	17	21	18	130	38.1	15.9	M14	1.60
UCPH206-18	1-1/8		90	165	121	50	17	21	18	130	38.1	15.9	M14	1.60
UCPH206-19	1-3/16		90	165	121	50	17	21	18	130	38.1	15.9	M14	1.60
UCPH206-20	1-1/4		90	165	121	50	17	21	18	130	38.1	15.9	M14	1.60
UCPH207		35	95	167	127	60	17	21	19	140	42.9	17.5	M14	2.10
UCPH207-20	1-1/4		95	167	127	60	17	21	19	140	42.9	17.5	M14	2.10
UCPH207-21	1-5/16		95	167	127	60	17	21	19	140	42.9	17.5	M14	2.10
UCPH207-22	1-3/8		95	167	127	60	17	21	19	140	42.9	17.5	M14	2.10
UCPH207-23	1-7/16		95	167	127	60	17	21	19	140	42.9	17.5	M14	2.10
UCPH208		40	100	178	137	70	17	21	20	150	49.2	19.0	M14	2.70
UCPH208-24	1-1/2		100	178	137	70	17	21	20	150	49.2	19.0	M14	2.70
UCPH208-25	1-9/16		100	178	137	70	17	21	20	150	49.2	19.0	M14	2.70
UCPH209		45	105	190	146	70	17	21	20	158	49.2	19.0	M14	3.10
UCPH209-26	1-5/8		105	190	146	70	17	21	20	158	49.2	19.0	M14	3.10
UCPH209-27	1-11/16		105	190	146	70	17	21	20	158	49.2	19.0	M14	3.10
UCPH209-28	1-3/4		105	190	146	70	17	21	20	158	49.2	19.0	M14	3.10
UCPH210		50	110	206	159	70	20	23	22	165	51.6	19.0	M16	3.50
UCPH210-30	1-7/8		110	206	159	70	20	23	22	165	51.6	19.0	M16	3.50
UCPH210-31	1-15/16		110	206	159	70	20	23	22	165	51.6	19.0	M16	3.50
UCPH210-32	2		110	206	159	70	20	23	22	165	51.6	19.0	M16	3.50
UCPH211		55	120	219	171	75	20	23	23	181	55.6	22.2	M16	4.07
UCPH211-32	2		120	219	171	75	20	23	23	181	55.6	22.2	M16	4.07
UCPH211-34	2-1/8		120	219	171	75	20	23	23	181	55.6	22.2	M16	4.07
UCPH211-35	2-3/16		120	219	171	75	20	23	23	181	55.6	22.2	M16	4.07
UCPH212		60	130	235	186	85	20	23	24	197	65.1	25.4	M16	6.31
UCPH212-36	2-1/4		130	235	186	85	20	23	24	197	65.1	25.4	M16	6.31
UCPH212-38	2-3/8		130	235	186	85	20	23	24	197	65.1	25.4	M16	6.31
UCPH212-39	2-7/16		130	235	186	85	20	23	24	197	65.1	25.4	M16	6.31

Products

Parameter Table of Pedestal Base Pillow BLock Bearing Units UCPH2

Bearing housing	pedestal base pillow block,two bolts	insert bearing:	ball bearing UC2 series,standard duty,wider inner ring
Brand:	LDK brand	locking type:	set screw locking (setscrew port annealed)
material	HT200 cast grey iron	material:	outer/inner ring: Gcr15(AISI52100) steel; steel ball: G10
zerk fittings	Zinc plated A3 steel		retainer: steel cage.
	at 90° position	Lubricant	SHELL GADUS S2 V220 2 only
paint	dark green	other:	oil groove and holes of outer ring are at same side of set screw
base	hollow base		anti-rotation pin at opposite side of setscrew
end cap	caps provided as need, two different mounting models for choice: S(open cover),SM (close cover)