Bearing No. | Dimensions(mm/inches) | Ball
dia | a°
mis.
angle | Load
ratings
(KN) | weight
≈kg |
|
| d+0.038 | B | C1 | d2 | d3 | h | L1 | L2 |
| -0 012 | UNF-2A |
| JM3 | 4.826 | 7.92 | 6.35 | 15.88 | 10-32 | 31.75 | 19.05 | 39.69 | 11.11 | 10 | 4.4 | 0.013 |
| 0.1900 | 0.312 | 0.250 | 0.625 | 10-32 | 1.250 | 0.750 | 1.562 | 0.437 | 10 | 4.4 | 0.013 |
| JM4 | 6.35 | 9.53 | 7.14 | 19.05 | 1/4-28 | 39.67 | 25.4 | 49.2 | 12.7 | 13 | 8.2 | 0.018 |
| 0.2500 | 0.375 | 0.281 | 0.750 | 1/4-28 | 1.562 | 1.000 | 1.937 | 0.500 | 13 | 8.2 | 0.018 |
| JM5 | 7.938 | 11.1 | 8.74 | 22.23 | 5/16-24 | 47.63 | 31.75 | 58.75 | 15.88 | 10 | 11.1 | 0.031 |
| 0.3125 | 0.437 | 0.344 | 0.875 | 5/16-24 | 1.875 | 1.250 | 2.312 | 0.625 | 10 | 11.1 | 0.031 |
| JM6 | 9.525 | 12.7 | 10.31 | 25.4 | 3/8-24 | 49.22 | 31.75 | 61.92 | 18.26 | 9 | 13.3 | 0.049 |
| 0.3750 | 0.500 | 0.406 | 1.000 | 3/8-24 | 1.938 | 1.250 | 2.437 | 0.719 | 9 | 13.3 | 0.049 |
| JM7 | 11.112 | 14.27 | 11.1 | 28.58 | 7/16-20 | 53.98 | 34.93 | 68.27 | 20.62 | 11 | 18.5 | 0.072 |
| 0.4375 | 0.562 | 0.437 | 1.125 | 7/16-20 | 2.125 | 1.375 | 2.678 | 0.812 | 11 | 18.5 | 0.072 |
| JM8 | 12.7 | 15.88 | 12.7 | 33.32 | 1/2-20 | 61.92 | 38.1 | 78.58 | 23.8 | 9 | 29.1 | 0.113 |
| 0.5000 | 0.625 | 0.500 | 1.312 | 1/2-20 | 2.438 | 1.500 | 3.093 | 0.937 | 9 | 29.1 | 0.113 |
| JM10 | 15.875 | 19.05 | 14.27 | 38.1 | 5/8-18 | 66.68 | 41.28 | 85.73 | 28.58 | 11 | 31.2 | 0.172 |
| 0.6250 | 0.750 | 0.562 | 1.500 | 5/8-18 | 2.625 | 1.625 | 3.375 | 0.937 | 11 | 31.2 | 0.172 |
| JM12 | 19.05 | 22.23 | 17.45 | 44.45 | 3/4-16 | 73.02 | 44.45 | 95.25 | 28.58 | 10 | 44.8 | 0.272 |
| 0.7500 | 0.875 | 0.687 | 1.750 | 3/4-16 | 2.875 | 1.750 | 3.750 | 1.125 | 10 | 44.8 | 0.272 |
| JM14 | 25.4 | 22.23 | 17.45 | 50.8 | 7/8-14 | 85.73 | 47.63 | 111.1 | 33.33 | 10 | 85 | 0.408 |
| 0.8750 | 0.875 | 0.687 | 2.000 | 7/8-14 | 3.375 | 1.875 | 4.375 | 1.312 | 10 | 85 | 0.408 |
| JM16 | 25.4 | 34.93 | 25.4 | 69.85 | 5/4-12 | 104.78 | 53.98 | 139.7 | 47.63 | 14 | 155.4 | 1.091 |
| JM16-1 | 25.4 | 34.93 | 25.4 | 69.85 | 1-14 | 104.78 | 53.98 | 139.7 | 47.63 | 14 | 155.4 | 0.964 |
| JM16-2 | 1.0000 | 1.375 | 1.000 | 2.750 | 12 | 4.125 | 2.125 | 5.500 | 1.875 | 14 | 155.4 | 0.964 |
Notes: For grease fittings add "Z" to the suffix. Example: JM6Z
For studs add "Y" to the suffix. Example: JM5Y
For teflon liner add "T" to suffix. Example: JM12T
Can supply rod ends with different pitch or accuracy of thread.
For the left-hand thread, the suffix "L" is added to bearing numbers. e.g.:JML12T 3/4-16L.
