| Structure | Series | Size range (mm) | Sliding contact surface | If requiring relubrication | Design characteristics |
 | PHS SPHS PHSB | 3-30 5-30 4.82-25.4 | Steel/Brass | Yes | Inlaid liner rod ends,Prefix "S"=Stainless steel.PHSB in inch dimensions |
 | POS SPOS POSB | 3-30 5-30 4.82-25.4 | Steel/Brass | Yes | Inlaid liner rod ends,Prefix "S"=Stainless steel.POSB in inch dimensions |
 | PHS…EC SPHS…EC SPHSB…EC | 5-22 5-22 4.82-19.05 | Steel/PTFE | No | Extrusion and self-lubricated type of rod ends,Prefix "S"=Stainless steel "B"in inch dimensions |
 | POS…EC SPOS…EC SPOSB…EC | 5-22 5-22 4.82-19.05 | Steel/PTFE | No | Extrusion and self-lubricated type of rod ends,Prefix "S"=Stainless steel "B"in inch dimensions |
 | PHS…HD | 5-30 | Steel/Brass | Yes | Combination rod ends |
 | POS…HD | 5-30 | Steel/Brass | Yes | Combination rod ends |
 | CHS SCHS | 3-30 5-30 | Steel/PTFE | No | Self-lubricated rod ends,Prefix "S"=Stainless steel. |
 | COS SCOS | 3-30 5-30 | Steel/PTFE | No | Self-lubricated rod ends,Prefix "S"=Stainless steel. |
 | NPHS | 5-30 | Steel/Nylon | No | Self-lubricated rod ends,race in Nylon polymer with PTFE additive. |
 | NPOS | 5-30 | Steel/Nylon | No | Self-lubricated rod ends,race in Nylon polymer with PTFE additive. |
 | SI…E | 5-12 | Steel/Steel | No | Combination rod ends,mounted with GE.E type of radial spherical plain bearings |
 | SI…ES SI…ES-2RS | 15-80 | Steel/Steel | Yes | Combination rod ends,mounted with GE.ES/GE…ES-2RS type of radial spherical plain bearings |
 | SA…E | 5-12 | Steel/Steel | No | Combination rod ends,mounted with GE.E type of radial spherical plain bearings |
 | SA…ES SA…ES-2RS | 15-80 | Steel/Steel | Yes | Combination rod ends,mounted with GEES type of radial spherical plain bearings |
 | SI…C | 5-30 | Steel/PTFE | No | Combination rod ends,mounted with GE.C type of radial spherical plain bearings |
 | SI…ET-2RS | 15-80 | Steel/PTFE fabric | No | Combination rod ends,mounted with GE.ET-2RS type of radial spherical plain bearings |
 | SA.…C | 5-30 | Steel/PTFE | No | Combination rod ends,mounted with GE.C type of radial spherical plain bearings |
 | SA…ET-2RS | 15-80 | Steel/PTFE fabric | No | Combination rod ends,mounted with GE.ET-2RS type of radial spherical plain bearings |
 | SK…E SK…ES | 10-12 15-80 | Steel/Steel | Yes | Stretching rod in fine weldable steel with slot in the shank and can be clamped by socket screws, Combinated with GE.ES type of radial spherical plain bearings l |
 | SF.ES | 20-120 | Steel/Steel | Yes | Stretching rod in fine weldable steel, with dowel pin,combinated with GE. ES type of radial spherical plain bearings,housing with a rectangle welding surface |
 | SIR…ES (d≤50) | 20-50 | Steel/Steel | Yes | Bearings with two slots in the shank and can be clamped by socket screws,right and left thread, combinated with GE.ES type of radial spherical plain bearings, |
 | SIR…ES (d≥60) | 60-120 | Steel/Steel | Yes | Bearings with single slots in the shank and can be clamped by socket screws,right and left thread, combinated with GE.ES type of radial spherical plain bearings, |
 | SIQ…ES | 12-60 | Steel/Steel | Yes | Bearings with two slots in the shank and can be clamped by socket screws,right and left thread,combinated with GE.ES type of radial spherical plain bearings, |
 | SIGEW…ES (d≤50) | 12-50 | Steel/Steel | Yes | Bearings with two slots in the shank and can be clamped by socket screws,right and left thread, combinated with GEEW.ES type of radial spherical plain bearings |
 | SIGEW…ES(d≥63) | 63-125 | Steel/Steel | Yes | Bearings with single slots in the shank and can be clamped by socket screws,right and left thread, combinated with GE.ES type of radial spherical plain bearings, |
 | SQ…-RS | 5-22 | Stee/Zinc alloy | Yes | Winding shape ball joint rod ends with female thread,housing is made of Zinc alloy. |
 | SQZ…-RS | 5-22 | Stee/Zinc alloy | Yes | Straight ball joint rod ends with axial shank,female thread,housing is made of Zinc alloy |
 | SQD… | 5-16 | Stee/Zinc alloy | Yes | Ball joint housing is an outer ring of radial spherical plain bearing,made of Zinc alloy |
 | CF… SCF… | 4.82-19.05 | Steel/Steel | Yes | Extrusion type of rod ends, Inch dimensions,Prefix "S"=stainless steel |
 | CM… SCM… CMX… | 4.82-19.05 | Steel/Steel | Yes | Extrusion type of rod ends, Inch dimensions,Prefix "S"=stainless steel |
 | CF…T SCF…T | 4.82-19.05 | Steel/PTFE | No | Extrusion and self-lubricated type of rod ends,Inch dimensions, Prefix "S"=stainless steel |
 | CM…T SCM…T CMX…T | 4.82-19.05 | Steel/PTFE | No | Extrusion and self-lubricated type of rod ends,Inch dimensions, Prefix"S"=stainless steel |
 | CF…TY | 10-32~3/4-16 | Steel/PTFE | Yes | Ball joint rod ends,Inch dimensions. |
 | CM…TY | 10-32~3/4-16 | Steel/PTFE | Yes | Ball joint rod ends,Inch dimensions. |
 | F JF…/JFL JFX…/JFXL… RJF… ALJF…IALJFL… | 4.82-25.4 4.82-25.4 4.82-25.4 6.35-9.525 4.82-12.7 | Steel/Brass Steel/Steel Steel/Steel Steel/Steel Steel/Steel | Yes | Wide alternatives of material for shanks and races for wider application |
 | M JM…/JML JMX…/JMXL… RJM… ALJM../ALJML… | 4.82-25.4 4.82-25.4 4.82-25.4 6.35-9.525 4.82-19.05 | Steel/brass Steel/Steel Steel/Steel Steel/Steel Steel/Steel | Yes | Wide alternatives of material for shanks and races for wider application. |
 | HJMX…T HRSMX…T | 9.52-19.05 | Steel/PTFE | No | Wide inner races,PTFE lined. |
 | RJMX…T SJM…T/SRSM…T HJMX…T PMX…T | 9.52-15.88 6.35-19.05 9.52-19.05 7.93-19.05 | Steel/PTFE | No | Wide inner races,PTFE lined. |
 | SJF…T | 6.35-19.05 | Steel/PTFE | No | Self-lubricated type,PTFE lined. Balls,shanks,races are all stainless steel |
 | RSM… RSMX.. ALRSM.. | 4.82-15.88 4.82-19.05 9.52-12.7 | Steel/Steel | Yes | High strength rod ends,Heavy duty shank |
 | RSM.…T RSMX.…T RRSMX…T SRSM.…T | 4.82-15.88 4.82-22.23 9.52-15.88 9.525-15.88 | Steel/PTFE | No | Self-lubricated type,Heavy duty shank |
 | NJM… | 4.82-19.05 | Steel/Nylon | No | Injection-molded type,race in injected Nylon polymer. |
 | NJF.… | 4.82-19.05 | Steel/Nylon | No | Injection-molded type,race in injected Nylon polymer. |
 | NXM… NEXM. NAM… | 4.82-19.05 | Steel/Nylon | No | Injection-molded type,race in injected Nylon polymer for extra axial load capacity. |
 | NXF… NEXF… NAF… | 4.82-19.05 | Steel/Nylon | No | Injection-moulded type,race in injected Nylon polymer for extra axial load capacity |
 | PEFM. | 4-30 | Plastic/Plastic | No | All plastic polymer rod ends.body and ball are manufactured from high quality engineering plastic polymer |
 | PEMM. | 5-30 | Plastic/Plastic | No | All plastic polymer rod ends.body and ball are manufactured from high quality engineering plastic polymer |
 | PKFM. | 2-30 | Plastic/Plastic | No | All plastic polymer rod ends.body and ball are manufactured from high quality engineering plastic polymer |
 | PKMM. | 5-30 | Plastic/Plastic | No | All plastic polymer rod ends.body and ball are manufactured from high quality engineering plastic polymer |
 | PKFI.. | 4.82-25.4 | Plastic/Plastic | No | All plastic polymer rod ends.body and ball are manufactured from high quality engineering plastic polymer. |
 | PKMI.. | 4.82-25.4 | Plastic/Plastic | No | All plastic polymer rod ends.body and ball are manufactured from high quality engineering plastic polymer. |
 | AS | 6-12 | Steel/Nylon | No | Self-lubricated type ball joint rod ends, Race in Nylon polymer. |
 | BS | 5-8 | Steel/Nylon | No | Self-lubricated type ball joint rod ends, Body in Nylon polymer with MoS2 additive |
 | CS | 5-16 | Steel/Steel | YES | Body and stud both in carbon steel, Body threaded, The axial clearance and load rating rely on two spring retaining rings. |
 | BALL STUD DIN71803 | 8-19 | Steel/Steel | YES | Ball stud for CS ball joints.Not assembled for user's convenient installation purpose in special circumstances.The user can decide and create a new way of linkage by selecting ball stud or socket. |
 | BALL SOCKET DIN71805 | 8-19 | Steel/Steel | YES | Ball socket for CS ball joints. Not assembled for user's convenient installation purpose in special circumstances. The user can decide and create a new way of linkage by selecting ball stud or socket |
 | GE…E | 4-12 | Steel/Steel | NO | Heavy duty,Outer race fractured, inner race hardened. |
 | GE…ES GEZ…ES | 15-300 12.7-152.4 | Steel/Steel | YES YES | Outer race fractured,inner race hardened Structure same as GE.ES,Inch dimensions. |
 | GE…ES-2RS GEZ…ES-2RS | 15-300 25-101 | Steel/Steel Steel/Steel | YES YES | Structure and dimension same as GEES, sealed on both sides. Structure same as GE.ES-2RS, Inch dimensions. |
 | GEEW…ES | 12-320 | Steel/Steel | YES | Outer race fractured,wider inner race,hardened. |
