Bearing housing: tapped base pillow block,two bolts,LDK brand (logo could be customized)
Material:HT200 cast grey iron(ductile iron available upon request)
Zerk fittings: Zinc plated A3 steel,at 45° position
Paint: dark green (other colors are available for choices)
solid base
High/low temperature grease or solid lube customization is accepted
Upon request,pressed steel cover available at both side。 (S=open cover/SM=close cover)
| Unit No. | Shaft Dia | Dimensions (mm) | Weight | ||||||||||
| d | H | L | J | A | H1 | H0 | G | M | S | B | (kg) | ||
| (in) | (mm) | ||||||||||||
| UCTB201 | 12 | 33.3 | 73.0 | 50.8 | 38.0 | 10.9 | 65.0 | 13.0 | 3/8-16UNC | 12.7 | 31.0 | 0.77 | |
| UCTB201-8 | 1/2 | ||||||||||||
| UCTB202 | 15 | 33.3 | 73.0 | 50.8 | 38.0 | 10.9 | 65.0 | 13.0 | 3/8-16UNC | 12.7 | 31.0 | 0.75 | |
| UCTB202-9 | 9/16 | ||||||||||||
| UCTB202-10 | 5/8 | ||||||||||||
| UCTB203 | 17 | 33.3 | 73.0 | 50.8 | 38.0 | 10.9 | 65.0 | 13.0 | 3/8-16UNC | 12.7 | 31.0 | 0.74 | |
| 11/16 | |||||||||||||
| UCTB204 | 20 | 33.3 | 73.0 | 50.8 | 38.0 | 10.9 | 65.0 | 13.0 | 3/8-16UNC | 12.7 | 31.0 | 0.73 | |
| UCTB204-12 | 3/4 | ||||||||||||
| UCTB205 | 25 | 36.5 | 76.0 | 50.8 | 38.0 | 12.0 | 71.0 | 13.0 | 3/8-16UNC | 14.3 | 34.1 | 0.83 | |
| UCTB205-14 | 7/8 | ||||||||||||
| UCTB205-15 | 15/16 | ||||||||||||
| UCTB205-16 | 1 | ||||||||||||
| UCTB206 | 30 | 42.9 | 102.0 | 76.2 | 38.0 | 12.0 | 86.0 | 16.0 | 7/16-14UNC | 15.9 | 38.1 | 1.36 | |
| UCTB206-17 | 1-1/16 | ||||||||||||
| UCTB206-18 | 1-1/8 | ||||||||||||
| UCTB206-19 | 1-3/16 | ||||||||||||
| UCTB206-20 | 1-1/4 | ||||||||||||
| UCTB207 | 35 | 47.6 | 108.0 | 82.6 | 48.0 | 13.0 | 95.0 | 19.0 | 1/2-13UNC | 17.5 | 42.9 | 1.83 | |
| UCTB207-20 | 1-1/4 | ||||||||||||
| UCTB207-21 | 1-5/16 | ||||||||||||
| UCTB207-22 | 1-3/8 | ||||||||||||
| UCTB207-23 | 1-7/16 | ||||||||||||
| UCTB208 | 40 | 49.2 | 117.0 | 88.9 | 48.0 | 13.0 | 100.0 | 19.0 | 1/2-13UNC | 19.0 | 49.2 | 2.13 | |
| UCTB208-24 | 1-1/2 | ||||||||||||
| UCTB208-25 | 1-9/16 | ||||||||||||
| UCTB209 | 45 | 54.0 | 127.0 | 95.3 | 51.0 | 14.0 | 108.0 | 20.0 | 1/2-13UNC | 19.0 | 49.2 | 2.75 | |
| UCTB209-26 | 1-5/8 | ||||||||||||
| UCTB209-27 | 1-11/16 | ||||||||||||
| UCTB209-28 | 1-3/4 | ||||||||||||
| UCTB210 | 50 | 57.2 | 140.0 | 101.6 | 51.0 | 14.0 | 117.0 | 22.0 | 5/8-11UNC | 19.0 | 51.9 | 3.08 | |
| UCTB210-30 | 1-7/8 | ||||||||||||
| UCTB210-31 | 1-15/16 | ||||||||||||
| UCTB210-32 | 2 | ||||||||||||
| UCTB211 | 55 | 57.2 | 140.0 | 101.6 | 51.0 | 14.0 | 117.5 | 22.0 | 5/8-11UNC | 22.2 | 55.6 | 3.37 | |
| UCTB211-32 | 2 | ||||||||||||
| UCTB211-34 | 2-1/8 | ||||||||||||
| UCTB211-35 | 2-3/16 | ||||||||||||
| Bearing housing | tapped base pillow block,two bolts | insert bearing: | ball bearing UC2 series,standard duty,wider inner ring | ||
| Brand: | LDK brand | locking type: | set screw locking (setscrew port annealed) | ||
| material | HT200 cast grey iron | material: | outer/inner ring: Gcr15(AISI52100) steel; steel ball: G10 | ||
| zerk fittings | Zinc plated A3 steel | retainer: steel cage. | |||
| at 45° position | Lubricant | SHELL GADUS S2 V220 2 only | |||
| paint | dark green | other: | oil groove and holes of outer ring are at same side of set screw | ||
| base | solid base | anti-rotation pin at opposite side of setscrew | |||
| end cap | caps provided as need, two different mounting models for choice: S(open cover),SM (close cover) | ||||
Kenneth Zhang: 19959266209
Benjamin Zhang: 13906058255
Jacy Lin: 15959344117
Spring Zhang: 18206090020
